Sweeper trucks, mist spray trucks, automation equipment, and other harsh environments requiring high stability and protection. Suitable for scenarios where noise tolerance is low but demands for reliability and protection are critical.
Advantages
High Protection (IP66/IP65)
Robust Structure (steel telescopic rod, copper nut)
Metal Gears (long lifespan, impact-resistant)
Strong Self-Locking (built-in self-locking torsion spring) & over-current protection
Disadvantages
High Noise (70 dB), typically recommended for outdoor use
Common Applications
Agricultural machinery, truck bed lifting, and other high-load scenarios Harsh environments requiring stability and protection over noise reduction
Customizable front/rear joints.
| Voltage: 12/24/36/48V DC |
| Max Load: 12000N |
| Max Stroke: Customizable ,generally not exceeding 1000mm |
| Minimum Mounting Distance: Refer to the drawing |
| No-load Speed: 5-38mm/s |
| Protection Level: IP66/IP65 |
| Operating Temperature: -20℃ to 60℃ |
| Noise Level: ≤70 dB |
| Controllers: Wired controller, wireless controller |
| Signal Outputs: Hall sensors, magnetic switches, limit switches |
| Code | Gear Ratio | Screw Lead(mm) | No-load Speed mm/s | Full-load Speed mm/s | Rated Load(N) | Self-locking Force(N) | No-load Current(A) | Load Current(A) | Max Strokewith built-inlimit switch mm | ||||||
| 12V | 24V | 36V | 48V | 12V | 24V | 36V | 48V | ||||||||
| A1 | 40 | 3 | 5.0 | 3.6 | 10000 | 11000 | 3 | 1.5 | 1.3 | 1.1 | 20 | 12 | 9 | 6 | 400 |
| B1 | 20 | 10.0 | 7.3 | 6000 | 6500 | ||||||||||
| C1 | 10 | 20.0 | 14.5 | 3000 | 3500 | ||||||||||
| A2 | 40 | 4 | 6.7 | 4.8 | 9000 | 9500 | 3 | 1.5 | 1.3 | 1.1 | 20 | 12 | 9 | 6 | 500 |
| B2 | 20 | 13.3 | 9.7 | 5000 | 5500 | ||||||||||
| C2 | 10 | 26.7 | 19.3 | 2000 | 2500 | ||||||||||
| A3 | 40 | 5 | 8.3 | 6.0 | 7500 | 8000 | 3 | 1.5 | 1.3 | 1.1 | 20 | 12 | 9 | 6 | 650 |
| B3 | 20 | 16.7 | 12.1 | 4000 | 4500 | ||||||||||
| C3 | 10 | 33.3 | 24.2 | 2000 | 2500 | ||||||||||
| A4 | 40 | 7.5 | 12.5 | 9.1 | 5000 | 5500 | 3 | 1.5 | 1.3 | 1.1 | 20 | 12 | 9 | 6 | 1000 |
| B4 | 20 | 25.0 | 18.1 | 2500 | 3000 | ||||||||||
| C4 | 10 | 50.0 | 36.3 | 1000 | 1500 | ||||||||||
| A5 | 40 | 12 | 20.0 | 14.5 | 3000 | 3500 | 3 | 1.5 | 1.3 | 1.1 | 20 | 12 | 9 | 6 | 1600 |
| B5 | 20 | 40.0 | 29.0 | 1500 | 2000 | ||||||||||
| C5 | 10 | 80.0 | 58.0 | 500 | 800 | ||||||||||
Note: The data in the table is measured at room temperature. Due to parts processing and installation precision, there may be errors with a maximum deviation of ±10%.
Front/Rear Joint Styles: Available in standard options or customizable
Ball screw, copper nut, timing belt drive, manual crank function, or full IP66 protection can be selected per customer requirements.
Standard brushed motors available. Optional stepper, servo, or brushless motors (motor dimensions must not exceed 60×60mm; no height restriction). Electromagnetic brakes can be freely combined to achieve emergency stopping of the actuator.
Motor wire colors may vary due to material supply batches. For inquiries, please contact us by phone. Additional wiring diagrams and electrical schematics are available upon request.
